Rosepath Unlimited

This seems unreal, like pulling an item right out of my imagination and touching it with my hands. It is exhilarating to watch a concept sketch develop into a tangible rag rug on the loom. Even though I enjoy designing at the loom, I relish the challenge of preparing a design in advance. In order to make a workable sketch I must study, think, and explore. It’s in this process that I realize the design options are limitless for rosepath rag rugs. This compels me to keep pressing in to learn and explore even more.

Beginning a new rag rug.
Hem, woven with narrow strips, follows the gold warp thread header. First wide border of the rug uses an assortment of green fabric strips.

The concept sketch is a scaled-down map of the rosepath rag rug. Each square on the gridded paper represents 6 centimeters. The sketch shows me which fabrics to use where, and specifies the placement of each design element—borders, plain weave, rosepath diamonds, dashes and dots of specific colors, etc. I add notes to the page as I weave, like specific treadling sequences and measurements, so that I can mirror them on the second half of the rug.

Concept sketch by the loom is my roadmap for weaving the details.
Concept sketch sits at the windowsill by my loom. I use it as a roadmap for weaving the details.
Weaving rag rugs with a temple. Always!!
Stretched-out temple is a necessity when I weave rag rugs. The wooden Glimåkra temple is my favorite because I can place it near the fell without risk of damaging the beater. This makes it possible to move the temple frequently, adding to weaving consistency.
Designing a rosepath rag rug.
Deep purple “dots” at the center of the rosepath diamonds serve as accents among these colors for a Texas hill country home.

Nothing can measure the greatness of the Lord. His greatness is truly limitless. Greatness is compelling. We step closer to search the unsearchable, and know the unknowable. God reveals himself, sketch after sketch, until we finally realize that we need all eternity to fully know him.

Rosepath rag rug - My favorite thing to weave!
Satisfaction of watching a concept sketch become a tangible rag rug.

May your concepts become tangible.

Happy Weaving,
Karen

12 Comments

  • Charlotte says:

    Ooooooooh honey girl! I do adore your newest creation!!!! The red certainly “pops”!

  • Rachel Lohman says:

    Beautiful! Out of curiosity, how wide is your Glimakra? And how wide will your rug be when finished? And do you have two rugs on the loom and do you separate them with wooden slats? Thanks!

    • Karen says:

      Hi Rachel, Thank you!

      This loom is a 100cm (39″) Glimakra Ideal. The width of the warp in the reed is 90.3cm (35.5″). I expect to lose around 12% in width from take-up, so I’m planning for a finished width of about 79cm (31″). Yes, I do have two rugs on the loom right now, and will have at least one more before cutting off. And yes, I do separate them with warping slats. I put a minimum of 8″ between rugs so that I will have enough length to tie the ends into knots for finishing. Great questions!!

      Happy weaving,
      Karen

  • Nannette says:

    Yeah!! Ditto what Charlotte and Rachel said!!!

    You took the warp in a direction I did not realize. So much to learn.

    Thank you.
    Nannette

  • Linda Adamson says:

    Lovely rugs. What are the Blake bands keeping the cover on the loom bench in Place? More fabric strips or large elastic bands?

    • Karen says:

      Hi Linda, The black bands are bungee cords, to my embarrassment. I put them on as a temporary “make-do” solution to see how I would like having this rug piece on my bench. And so they stay. I like the rug cover for my bench, but haven’t taken the time to make it more permanent.

      Thanks,
      Karen

  • Robin Chandler says:

    Do you have a weighted beater?
    I didn’t like the recommendation to drill holes and add weighted bars, so I put ankle weights on both ends of my beater for rugs, seems to help.

    • Karen says:

      Hi Robin, I do not have a weighted beater. I tried adding some walking weights on both ends a few years ago, but I couldn’t tell that it made a difference for me. The overslung beater is such an advantage on these looms. I can lean back (like Jason Collingwood teaches) and let the momentum of the beater do a pretty good job. People in my house think I get a pretty powerful beat on my looms. 🙂

      Happy Rug Weaving,
      Karen

  • Karen says:

    It’s going to be AMAZING!

Leave a Reply to Karen Cancel reply