Tools Day: Cartoon Trials

Making a cartoon for a lizard tapestry this size is quite a process. First, I enlarge the photograph. Then, I trace the outlines of the details onto a sheet of clear acetate. Next, to make the cartoon, I trace the bold Sharpie lines of the acetate image onto interfacing material meant for pattern making. But next time, it will be different.

Tracing photograph to make a tapestry cartoon.
Tracing outlines from the enlarged photograph onto the sheet of acetate. Photo image on the iPad helps clarify which distinctive lines to draw.
Making a tapestry cartoon.
White poster board under the acetate makes the Sharpie lines visible. The interfacing material lays on top of the acetate so I can trace the lines to make my cartoon.

I don’t plan to use this interfacing material again for a cartoon. It is not stiff enough. As the tapestry progresses it becomes more and more difficult to keep the cartoon from puckering and creasing in places. A better option would have been stiffer buckram, like I used for my transparencies. (See – Quiet Friday: Painting with Yarn and Animated Images.) But I am not able to find buckram in sufficient width.

Unwanted creases in the tapestry cartoon.
Interfacing material is susceptible to puckers and creases. Unevenness in the cartoon can result in a distorted woven image on the tapestry.

After I finished weaving the lizard portion of the tapestry, I decided to experiment. I removed the interfacing cartoon and switched to the acetate sheet instead. There’s no puckering with this one! It is much easier to line up the cartoon with the weaving. It has drawbacks, though. Noisy! When I beat in the weft it makes thunderstorm sound effects. (Not so great for our temporary apartment life.) It’s also harder to see the cartoon lines. And the magnets I use to hold the cartoon slip out of place too easily.

Using a sheet of acetate for a tapestry cartoon.
Slat holds the cartoon up to the warp. To beat the weft, I move the slat out of the way of the beater, just under the fell line. The sheet of plastic would be a good prop for making sounds effects for a film about a thunderstorm.

Next time... White paper, like the gorgeous tapestry cartoon I have seen in Joanne Hall’s studio. That’s what I’ll use. Next time

Joanne Hall and her tapestry cartoon!
Joanne Hall in her Montana studio. This is the cartoon she made for her impressive Bluebonnets tapestry that hangs on display in a Dallas hospital.

May you learn from your experiments.

All the best,
Karen

Tapestry at Full Snail Speed

I am determined to have this off the loom before it’s time to move again. I know exactly how many “weaving days” I have left in this apartment. Steve’s retirement is just around the corner. His last day at work will be our last day here. And I know exactly how many centimeters I have left to weave on this piece. We already moved the loom once in the middle of this tapestry. Once is enough! I intend to make significant weaving progress every single day.

Measure tape shows progress on the tapestry weaving.
My measure tape shows that I have woven 80 centimeters. I will cross the finish line when I reach 125 centimeters.

Now that the image of the lizard is finished all the way to his toes, no more pretty green, blue, or red butterflies. I am removing anything that clutters my focus. Full (snail) speed ahead!

Weaving a lizard in four-shaft tapestry.
Lizard’s foot tries to grip the breast beam. There is no longer a need for butterflies in the lizard’s colors. Only the background log remains.
Weaving four-shaft tapestry on a Glimakra Ideal loom.
All the green, blue, and red butterflies have been removed. A simple color palette remains–white, yellow, tan, gray, brown, and black.

Faith is that kind of determination. Faith is more than thinking you believe something or someone. It’s pouring yourself into pure-hearted focus to trust fully in God. Faith is being so convinced that Jesus is the answer that you will stop at nothing to reach him. Where there’s that kind of will, there’s a way.

May you reach your most-pressing goal.

Your speedy snail,
Karen

Tools Day: Band Loom Warping Board

It is almost effortless to make a short warp for the band loom. All you need is a peg at the beginning and a peg at the end. You can use a spoke of the warp beam wheel, for instance, at one end, and the leg of an upside-down stool at the other. I normally use my warping reel, though, for even a simple warp, because the reel is so handy. However, I don’t have my warping reel here at the apartment, so I am turning my band loom into a handy warping board for this band loom project.

Using the Glimakra band loom as a warping board.
Using the Glimåkra band loom to measure a narrow cottolin warp.

How to Use the Band Loom as a Warping Board

Tools and supplies:

  • Glimåkra band loom
  • Thread for weaving a narrow band
  • Basket and/or spool holder(s)
  • Scissors
How to use the band loom as a warping board.
Starting at one peg and ending at another. The band loom becomes a simple tool for winding a short warp.

For a warp of approximately two meters:

  • Put the warp thread on the floor below—quills in a basket, and/or thread tubes on spool holders.
  • Using two or more ends, tie the ends together with an overhand knot. (I used three ends together for this warp.)
  • Bring the warp ends up around the warp beam and over the back beam.
  • Loop the knot on the starting peg.
  • Draw the ends from the starting peg to the ending peg, around the band loom, following this path:
  1. Starting peg–upper heddle peg nearest back beam
  2. Lower heddle peg nearest back beam
  3. Back beam
  4. Warp beam
  5. Cloth beam
  6. Front beam
  7. Lower heddle peg nearest front beam
  8. Ending peg–upper heddle peg nearest front beam
  • Follow the winding path in reverse order back to the starting peg.
  • Continue winding until you have reached the desired number of ends.
  • Cut the ends and tie off at the starting peg or the ending peg.
  • Tie one or two choke ties, if needed. (I didn’t need them for this short warp.)
  • Carefully remove the warp and dress the band loom as usual. (For a tutorial on dressing the band loom, click here: Quiet Friday: Band Loom Warping and Weaving.)
  • Weave to your heart’s content.
Weaving hanging tabs for towels on my Glimakra band loom.
One meter of woven band is cut off. The remaining band warp is tied back on. Weaving can resume at any time.
Preparing to sew handwoven ribbons onto handwoven towels for hanging.
Ends secured, and cut in 10.5 cm lengths, the tabs are ready to be sewn onto the double weave towels.

May you find tools you didn’t know you had.

Happy band weaving,
Karen

Grow Lizard Grow

There are no growth spurts with this lizard. He is certainly growing, but at a slow and steady rate. If I can keep this pace of about ten centimeters a week, I will be able to finish this tapestry before we move from the apartment—our temporary residence. The timeline is set. Will this slow-going, slow-growing lizard cross the finish line before I must dismantle the loom again? Time will tell. I have woven fifty centimeters. I have seventy-five centimeters to go.

Weaving a tapestry of a lizard.
Lizard’s foot and leg are starting to disappear around the breast beam on the right-hand side of the loom.
Many wool butterflies in action for this detailed tapestry.
Head of the lizard is visible on the cartoon under the warp. Many wool butterflies crowd each other, due to frequent color changes in the details.
Weaving the lizard's mouth and eye. Tapestry fun!
Lizard is visibly growing. Currently working on the red mouth and blue eye.

Grow. We are woven together by loving each other. Each of us, like strands of wool yarn, with our own degree of hue, saturation, and value, not to mention twist and plies, are united with each other when we hold fast to Jesus Christ, the designer and weaver. His tapestry grows, not in spurts, but slow and steady, year after year, century after century. Always teaching us to love his way—sacrificially. And we know he has just enough time to finish the tapestry masterpiece that he has envisioned from the very beginning.

May you see slow and steady progress in things that matter.

Happy Weaving,
Karen

Forty-Four New Butterflies

The tapestry is now at forty centimeters, and the lizard is slowly crawling his way around the breast beam. I treat every ten centimeters as a milestone. It’s a good time to examine the work and make additional butterflies. I see that I need forty-four new butterflies to make it through the next ten centimeters! No two butterflies are identical. I vary the combination of yarns for each color set. These subtle color and textural variations add interest and depth to the piece.

Making butterflies for tapestry.
Various wool yarns, light green and white. I combine strands to make a bundle that is approximately equivalent in size to four strands of 6/2 Tuna wool.
Wool butterflies for tapestry of a lizard.
Green and white wool butterflies are each a little bit different.
Butterflies for weaving a tapestry.
Butterflies hang in order on a length of seine twine within easy reach of weaving.
Lizard tapestry in progress.
Color blending and color gradation is possible through the careful selection of prepared butterflies for each section.

Me. It’s all about me. That’s exactly what the tempter wants me to think. Everything should revolve around me. Wait a minute. There’s a tapestry being woven that is much bigger than me. I may be a single wool butterfly. I’m unique. And my colors and textures contribute to the tapestry in important ways. But I mustn’t forget the Grand Weaver. He carefully and deliberately wound these strands of yarn over his loving fingers to create the color he wanted to see in his tapestry. It’s not about me. It’s about the One who holds me in his hands.

May your unique colors contribute to the tapestry.

Happy Weaving,
Karen