Meet and Separate Strategies

Pictorial tapestry on the floor loom requires a good working knowledge of basic tapestry techniques. Doing small tapestries on a tapestry frame loom, line by line, is one thing I do to hone these basic skills. I have finally reached the happy realizaton that I am no longer frustrated by meet and separate.

After several rows of scrap wool to space the warp, I weave ten rows of 6/1 tow linen as a header.

Meet and separate is a simple concept. It’s not hard to understand. Two butterflies come toward each other (meet) in one shed, and they move away from each other (separate) in the next shed. If you are working with only two butterflies — piece of cake! But when you need to add one more butterfly in a row you can find yourself in a pickle!

Butterflies are arranged so that the heads of butterflies are next to each other, and tails of butterflies (which have been tucked to the back) are together.

Resources that help me understand basic tapestry techniques, including meet and separate:

The Art of Tapestry Weaving, by Rebecca Mezoff

Tapestry Design Basics and Beyond, by Tommye McClure Scanlin

Tapestry Weaving, by Kirsten Glasbrook.

Workshops by Joanne Hall for weaving tapestry on a frame loom.

Meet and separate. Two butterflies on the right-hand side don’t have “partners.” New butterflies will be added in the next row that will balance the meet-and-separate order.

Meet and Separate strategies:

  1. Add two butterflies at a time. Remove two butterflies at a time. (Easier said than done.)
  2. Add one butterfly near where you are ending another butterfly.
  3. Add a “two-headed” butterfly, with the two heads going in opposite directions.
  4. If you must add or remove a single butterfly, expect to reset one or more other butterflies. (To reset a butterfly, cut it off and tuck in the tail, and then reverse its direction.)
  5. Think ahead. You may find that the next row will need one more (or one less) butterfly, and the problem will resolve itself.
So far, not too complicated for meet and separate.
As the tapestry progresses it’s a continual dance of the butterflies.
More butterflies. More fun.

Every row is a game of strategy. Where is the best place to add in a new color butterfly? How can I add or remove a butterfly and cause the least disruption? It’s an intriguing puzzle. The frustrating part has become the fascinating part.

May your frustrations become your fascinations.

Glad to Meet,
Karen

Weaving Hearts

Pulling the draw handles for each four-thread unit of weaving is like doing counted cross stitch on the loom. I enjoyed cross stitch in the 1980’s and I am enjoying this drawloom version now. Very much. I started this Heart-Shaped Baskets table runner on Valentine’s Day—a fun way to celebrate the day!

Heart-Shaped Baskets. Adapted from pattern in Damask and Opphämta, by Lillemor Johansson.
Heart-Shaped Baskets. Adapted from a pattern in Damask and Opphämta, by Lillemor Johansson.
Drawloom hearts.
Red 16/2 cotton weft on unbleached 16/2 cotton warp. The dark weft on a light warp makes consistency in beating that much more important.

Like weaving on any floor loom, I want to have consistency in my beat and in my selvedges. Inconsistencies in these basics can detract from the drawloom imagery of the final cloth. The main thing is to keep paying attention. And keep joyfully pulling those draw handles to create more hearts of love.

Drawloom hearts.
Stripes at the edges prove to be a challenge for getting consistent selvedges.
Table runner on the drawloom.
Table runner is woven in broken twill on four ground shafts, with eleven pattern shafts.

Grace is a gift of favor, not an earned reward. Forgiveness is the giving of grace. And gratitude results from receiving grace. Grace makes us graceful. Giving and receiving grace with consistency is what we’d like to see in ourselves. That’s when the love of God, in whose image we’ve been made, is most clearly seen in us. So we practice what we know to do. And pay attention. And keep joyfully weaving a heart of love, by God’s grace.

May you be grace – full.

Gratefully yours,
Karen

Kuvikas and Taqueté

Kuvikas and taqueté. There are always new things to try. I’m back to eight shafts. This Glimåkra loom is highly adaptable. It is no problem to set up the loom for a new project. You may have guessed that I like to switch it up. Four shafts or eight shafts, two treadles or ten. And, change the tie-up, too. I don’t mind. With this project, I am going to change the treadle tie-up again at the midway point, switching from kuvikas to taqueté.

Threading eight shafts on my Glimakra Standard loom.
Threading eight shafts. Four pairs of shaft bars have been added to switch from a four-shaft project to an eight-shaft project. Four additional upper lamms and lower lamms have also been added to the loom.

If you know and practice the basics, it’s not frightening to try new weave structures. Every new experience builds on what I’ve learned before. I can trust the system of weaving that I’ve been taught, and that I practice with every project. It makes sense.

Aquamarine cotton. Threading my Glimakra Standard loom.
After the warp is beamed, the warp ends are tied with an overhand knot into groups, according to the threading pattern. In this case, 48 ends are in each group. Counting the ends into groups helps eliminate, or at least reduce, threading errors.

Threading eight shafts for kuvikas and taqueté.
Complex, but not complicated. Warp ends are inserted into specific heddles to set up the loom for a particular type of cloth. Very systematic.

Don’t be afraid. The Lord not only teaches us his ways–his system, but offers us his strength while we learn. I can trust him for that. Trust replaces fear. I don’t have to find my own way, or guess. The system works. It makes sense. I learn to weave, and live, one step at a time, with freedom to enjoy the process.

May you rise above your fears.

All the best,
Karen

Weaving Basics

I love making bands! I started weaving bands in the 1980’s on my inkle loom; and more recently, I have been weaving bands on my Glimåkra two-treadle band loom, like these bands. Now, I am also learning to weave bands with a small rigid heddle. (The pattern for this Sámi band is from this book – not an affiliate link.)  There are rudiments of weaving that form a basis for understanding and developing skills. In the arena of faith, convictions are the rudiments that form a basis for learning and growing.

Rigid Heddle Band Weaving
Doubled 8/2 purple cotton thread forms the pattern, and single strands of 8/2 unbleached cotton are used for the background. Tools used are a rigid heddle, a shaped band knife, and a band lock.

  • Keep warp ends in order
  • Maintain even warp tension
  • Prepare your shuttle with carefully-wound weft
  • Pay attention to selvedges
  • Stay consistent with weft density
  • Follow a written draft, or a pattern passed down, or one committed to memory

Understanding these and other basics will give you a good foundation for any type of weaving, large or small. If I keep these essentials in mind as I practice, I have every hope that I will end up with something worthwhile.

Convictions of the heart form the basis for learning how to live in a meaningful way. When these convictions arise out of faith in our master weaver, they are accompanied with unfailing, unwavering, and unending hope. And hope assures that the journey is worthwhile.

May hope be your lifelong companion.

Reviewing the basics,
Karen