Weaving Is Stretching Me

This warp is a triple challenge! 1. Full width (110 cm), 2. Fine threads (24/2 cotton), and 3. Unevenly-spaced narrow stripes. Three hours to wind the warp. Three hours to pre-sley and beam the warp. Seventeen hours to thread heddles, sley the reed, tie on the warp, and tie up the treadles. Why invest this much time and embrace this much difficulty?

1,984 ends have been threaded in heddles, and now are being sleyed through the 90/10 reed. Careful checking and re-checking all through the processes helps prevent errors.
It is a good feeling when all the ends are finally in their places.

Why embrace this challenge? Because I see what no one else sees. I see the curtains that are specially designed for our remodeled bathroom. I understand the draft, the threads, the stripes, and everything that works together in a certain way. I see it. Though not yet visible, I could see it before I started. And so, all the challenges become part of the story, and I’m determined to keep going. I aim to finish strong.

After all is set up, the first testing I do is with shuttles. Which shuttle is best for sending all the way across this wide warp? The medium Glimåkra boat shuttle that holds 11 cm quills is the winner, not the longest, largest, and heaviest shuttles.
Seeing the beauty of this cloth solidifies the hope of seeing special curtains gracing our bathroom windows.
What begins as an M’s and O’s draft for kitchen towels in Väv Magazine, and expands with pictures in a Malin Selander book, and grows with my imagination, is now visible on the loom!
The two biggest challenges that remain: 1. Filling quills. It takes a while to fill a quill with this fine thread. It doesn’t take long at all to empty the quill as I weave. 2. This wide warp stretches my arms to my full arm-length reach. It’s good to be stretched! 🙂

This is a picture of faith. Faith acts on things not seen by others. Faith sees what is not yet visible. With faith in Jesus Christ, all the challenges become part of the story. We go the duration because we have a view of the finished work.

May your challenges stretch your faith in a good way.

Giving Thanks,
Karen

Combination Drawloom – Simple and Engaging

I am constantly improving my methods of operating the drawloom. I pull and release draw handles and draw cords, check for errors, and throw the shuttle for each unit of threads (six times per unit with the current setup). Everything is in order. And, while I’m actively absorbed with this mental and physical choreography, I experience freedom from every other care.

Hem of towel is bleached 16/1 linen weft, and then green 16/2 linen weft. The pattern area of the towel is woven with royal blue 16/1 linen weft.
Solid row of pattern across the warp requires that all pattern shaft draw handles are pulled. It always seems thrilling to me to see all the handles down at once!
Lower border of the towel is the easy part. Pattern shafts are used for making a repeated pattern, and no single unit cords are involved.
Pattern shaft draw handles are now relegated to the side borders. The center body of the towel uses single unit draw cords to create non-repeated pattern. The single units give me freedom to design a (planned) random snowfall expression.
Snowflake Towel 01 is wrapping around the cloth beam. Snowflake Towel 02 is going over the knee beam. Snowflake Towel 03 is being woven. Snowflake Towel 04 will be the final towel on this warp. (But, who knows what I’ll be able to weave after that to the very end of the warp?)

These snowflake patterns are delightful to weave. There is enough consistency with the border pattern shafts to make it simple. And there is enough (planned) random snowflakes using single units and pattern shafts to keep it engaging. All I have to do is follow the graphed chart. As I weave, the snowflakes emerge, as if by magic. But it’s not really magic, is it?

Standard procedure is to always have a temple in place. I have rubber bands on the first and last draw handles for the side border pattern, and on the center handle for the border pattern (not pulled in this photo).
Everything works together! …for the good of the fabric being woven.
Sometimes one single unit is enough to make the next row of pattern.
I keep the chart at eye level and constantly refer to it. Closely following the chart is the only way I can hope to weave something worthwhile on the combination drawloom.

If you believe in Jesus you must walk with him. And as you do, you come to know the truth. Truth is found by walking in it. The pattern on the chart is true, and gives direction. The delight comes as we see the real-time results emerge in our own hearts. That’s freedom in its purest form.

May your search for truth bring freedom.

Happy Weaving,
Karen

Long Conversation with the Loom

Day after day, pick after pick, this fabric lengthens and becomes ever more significant. As daylight dims, I stay at the loom a while longer. The rhythmic series of weaving motions is soothing. A handweaver finds calm in the complexity and delight in the detail. Challenges that arise are seen as problems to be solved.

Weaving for a short while in the evening helps wind down the day.

This monksbelt table runner has been a good long conversation between the loom and me. In fifteen more centimeters (six inches) I will put the closing exclamation point at the end of this lengthy runner. The warp that remains will be my playground for some creative experimentation.

Long monksbelt table runner wraps around the cloth beam.
Monksbelt pattern with weft rep ground weave. 16/2 cotton warp. 6/1 Fårö wool pattern weft in six colors. 16/2 ground weft in three colors.

When our patience is stretched thin, when we forget why we do what we do, when hard times go on longer than we ever anticipated, we need hope. We need more than what we can gain by ourselves alone. Relationship with our heavenly Father brings hope into the fabric of our days. He beckons us to walk with him through Jesus Christ. He wants to sustain us through the long stretches of this day-by-day life. The time will come when we look back with wonder, seeing the colorful threads that have become fabric for a beautiful purpose.

May you never lose hope.

With you,
Karen

Process Review: Threading Preparation and Two Pairs of Lease Sticks

Dressing the loom with two sets of lease sticks keeps me on my toes. It means I am thinking carefully as I transfer lease sticks from in front of the reed to behind the reed. And, after beaming the warp(s), it means I am counting carefully as I put ends into threading groups of 48 threads each—32 ends of 20/2 cotton, and 16 ends of 22/2 cottolin.

Two set of lease sticks have been carefully moved from in front of the reed to behind the reed. After straightening all the warp ends, I will beam the warp.

I group ends together before threading. Then, when threading, if there is a discrepancy in the number of ends, it alerts me to find a threading error. Counting out these delicate unbleached cotton threads is challenge enough. Having the layer of cream cottolin threads underneath presents additional complexity. With all these ends, this part of the process is tedious. Still, it’s worth it if it lessens my chance of making threading errors with these 1,472 ends.

Preparation for threading. Ends are gathered into threading groups and tied together with a loose slip knot.
Each set of lease sticks is tied to the back beam separately, so they can hang at different heights. The lower set is tied around the side frame and over the back beam.
If I stand behind the loom, my back is in a leaning-forward position and not comfortable for long. I placed a child’s chair and cushion behind the loom. Kneeling behind the loom at this height gives me good visibility and access to the threads.
View from the back of the loom. Ends are counted at the center of a pair of lease sticks. These counted ends are tied together in a loose slip knot.
View from behind the loom. Loop of unbleached ends just counted lay on top to clear the view. Ends on lower pair of lease sticks are counted and tied separately. I tied the cotton threads and the cottolin threads separately to make it easier to find an error if I miscounted along the way (which, fortunately, didn’t happen).
Counted ends are dropped into hanging position before moving on to the next grouping. (After taking this picture, I re-tied the lease sticks closer together, making counting easier.)
Threads remain in the reed. I pull threads out of the reed when they are counted.
Pretty sight of counted ends. Ready for threading!

One step at a time.

May you enjoy the process you are in.

Happy Loom Dressing,
Karen

Spreading Two Warps at Once

I am spreading this warp (two warps, actually) at the worktable. One warp is 22/2 cottolin, with a narrow selvedge border of 16/2 cotton. The other warp is 20/2 cotton. This intriguing double-width project is in the Nr.3 – 2021 issue of Väv MagazineWinnie’s Linen-Cotton Crinkly Tablecloth, by Winnie Poulsen, p.52. Despite some intrepidation, I am jumping in!

Spreading 2 warps for a double-width project.
First warp has been pre-sleyed, and the loops are held in place on the cloth beam tie-on bar. Now spreading the second warp, and placing both warps’ loops on the long stick in front.

Coordinating two warps onto a single tie-on bar is tricky business. The last time I did the two-warp maneuver at the loom I nearly lost a lease cross and my sanity. The advantage of pre-sleying these warps at the table is that everything is secure. Nothing is teetering. At the worktable I can clearly see what to do for each step. Within minutes, I’m hopeful that this adventure will indeed be worth it. (Pre-sleying a warp on the table is expertly explained in Learning to Warp Your Loom, by Joanne Hall, pgs.19-20.)

Two warps for one double-width project.
Second stick holds both warps’ loops.
Spreading two warps in the reed.
Tie-on bar slides in and warps’ loops are secured by tying a string from one end to the other.
Getting ready to weave some differential shrinkage!
Extra stick is removed. Two warps, each with its own set of lease sticks, have been spread in the reed. No mishaps along the way!
Glimakra Julia ready for a new fun warp!
Warp bouts are in the basket. The two sets of lease sticks, the reed, and the cloth beam tie-on bar sit on top. We’re ready to beam this warp on the Julia!

Spreading a warp (or two) is a lot like spreading hope. We come to the Lord Jesus weary, having tried hard to make things work on our own. He welcomes us with open arms and reveals the time-tested way of trusting him, one step at a time. Now, like threads being sleyed across the dents of a reed, threads of hope spread throughout our being. The threads are secured. Come weary; receive rest; spread hope.

May you be ignited with hope.

Your friend,
Karen