Process Review: Dressing the Drawloom the Second Time

Dressing the drawloom the second time is easier than the first time. No slip ups or confusion. Just smoothly moving from one step to the next. (Read to the end to see what to expect for July.)

Winding skeins of wool yarn into balls.
Winding skeins of wool yarn into balls.

With my first drawloom warp the most challenging part was distributing the pattern shafts. (See Q and A with Joanne Hall and Drawloom Dressing.) This time something clicked and the light bulb turned on. Instead of blindly following steps, I now understand what I am doing, and why. And I am having fun in the process!

Winding warp on the warping reel.
Winding the warp on the warping reel, making two bouts.
Big fat wool warp chains.
Warp chains of 6/2 Tuna wool, ready to dress the loom.
Ready to thread pattern heddles.
After beaming the warp, the loom bench is moved to the back of the loom for threading heddles. Pattern heddles first, and then, ground heddles.
Sleying the reed on the drawloom.
With the reed sleyed, it’s time to return the ground shafts to the front of the loom and put the reed in the beater.
Leveling string is doing its job!
Warp is tied on, and the leveling string is doing its job.
Distributing pattern shafts on the drawloom.
Inkle band serves to separate pattern heddles as I distribute the pattern shafts.
Adding pattern shafts to the drawloom.
Pattern shafts are resting nicely on the pattern shaft holders. Their little hooks grab the Texsolv that connects them to the draw cords and handles.
Dressing the drawloom!
Pointed threading can be seen in the arrangement of the heddles on the pattern shafts.
Dressing the drawloom!
Drawloom setup is complete except for tying up the treadles. Treadle tie-ups on a drawloom are refreshingly simple.
Testing pattern sheds on the drawloom.
Testing pattern sheds by pulling some of the draw handles. After a few small adjustments, she’s ready to weave!
Wool on the drawloom.
First sample. 6/2 Tuna wool warp and weft, 4-shaft broken twill on the ground shafts, sett is 5.5 ends per cm, 16 pattern shafts with 1 extra shaft for the edges.

Friends, It’s that time again, when Warped for Good is put on pause for the month of July.

Thank you for sharing in this journey with me!

What’s on my looms: I am near the end of the blue double weave blanket on the Standard, and I am planning a new pictorial tapestry for that loom. The drawloom is dressed and in motion. And the Ideal loom is still sitting ready for rosepath rag rugs. Also, Steve and I have a Casita trip planned that will include some leisurely backstrap band weaving.

What’s on your loom right now? Share with us in the comments.

See you the first Tuesday of August! (In the meantime catch me over on Instagram @celloweaver.)

May your second times be better than your first times.

Keep on Weaving,
Karen

Skinny Inkle Band

This is the narrowest inkle band I have ever made! With thirteen ends of fine 16/2 cotton, I get a very skinny ribbon. I brought my inkle loom with me to the Texas Woodcarvers Guild Spring Round-Up. This gives me something to do at the “Conversation Table” while Steve attends wood carving classes. Some ladies have their crochet, some have their knitting, and I have my inkle.

Skinny inkle band.
Inkle shuttle holds fine 16/2 cotton weft.

Farm scene relief carving.
Steve making progress with his farm scene relief carving.

The inkle loom is a conversation piece, to be sure. Inquiring people stop to look and ask questions. Many think it looks complicated. “It’s a lot simpler than carving a piece of wood,” I say with a smile.

Skinny inkle band, woven with 16/2 cotton.
Warp is close to the maximum length possible for this inkle loom. Off the loom, the band measures about 2 1/2 yards (2.25 meters).

Dime shows scale of narrow inkle band.
Finished skinny inkle band, with a dime for scale.

Seek the Lord; seek His strength. Walk in the Lord’s strength. When this is your habit, your continual mindset, life’s struggles seem less complicated. Down shedshuttle – up shed – shuttle. Repeat. Keep going to the end. 

May you have the strength you need. 

Truly Yours,
Karen

Weave the Portable Way

What do you do when you are away from your looms for a week? Portable weaving, of course. I thought about bringing my band loom, but fitting the band loom in the car turned out to be more of a hassle than it is worth. So the band loom stayed home.

Glimakra band loom with cottolin warp.
Band loom stays home.

I have my inkle loom with me instead, as well as my small tapestry frame. Steve is taking a woodcarving class from Dylan Goodson this week at the Texas Woodcarvers Guild Seminar; and while he is in class I am keeping my hands busy with portable weaving.

Woodcarving class by Dylan Goodson.
Steve beginning to shape his relief carving, following the finished example by his instructor, Dylan Goodson.

Linen inkle band.
First inkle band of the week is linen.

Cottolin inkle band warp.
Cottolin warp for the second narrow inkle band.

Cottolin inkle band.
Second inkle band almost finished.

Small tapestry on portable frame loom.
Start of a small tapestry of a little girl, derived from a picture in a children’s book.

Cottolin inkle band. Karen Isenhower
Time to put on one more inkle warp!

Woodcarver doing relief carving.
Adding more details to the relief carving. Good carving takes time and patience. Like weaving.

May you enjoy passing the time away.

Happy portable weaving,
Karen

Tools Day: Enough Shuttles for Now

If I line up all my weaving shuttles, end to end, how far do you think they will reach? The accumulation started slowly, adding a shuttle here and there, as needed. My husband contributed to my collection by handcrafting some of the shuttles for me. “I could use a stick shuttle in such-and-such a size.” “Okay, dear,” he would say, before going out to the garage to whip up yet another yardstick shuttle for my rigid heddle loom.

Ski shuttles are for rag weaving. Boat shuttles are for almost everything else. Most of my boat shuttles are traditional Swedish shuttles. All these fascinating shuttles, such simple tools, work the wonder of weaving.

Hand-crafted walnut stick shuttles for rigid heddle loom. Mohair/silk/alpaca shawl.
Shawl woven on 32-inch rigid heddle loom, with super kid mohair/silk and baby alpaca. Smooth, handcrafted walnut stick shuttles were used for this project.

Novelty yarn woven on inkle loom.
Tapered edge on pine inkle loom shuttle helps for beating in the weft. I have been known to weave with crazy novelty yarns on my inkle loom.

Hand-carved maple band loom shuttles, and woven bands.
Maple band loom shuttles, hand-carved by my husband, *live* in a small handmade bag that hangs on the back corner of the band loom. This shaped shuttle is perfect for the tricky one-handed manipulation that is needed. If they are too smooth and polished, however, they slip right out of my hand.

Ski shuttles for rag rug weaving. This rug used 3 shuttles at a time.
My favorite ski shuttle is the beautiful cherry wood shuttle made by my husband, Steve. It helps to have several ski shuttles. The “Creative Expression” Rosepath Rag Rug used three shuttles at a time to get the gradient color effect.

Boat shuttles ready to weave.
Boat shuttles eager to weave. Do you hear them? … “Pick me”…”No, pick ME!”

A few of my favorite things. Karen Isenhower
These are a few of my favorite things. Swedish woven goods made on a Swedish loom with Swedish boat shuttles. (I’m the only thing not Swedish here.)

34 1/2 feet of weaving shuttles.
How far will my shuttles reach? 34 1/2 feet (that’s 11 1/2 yards, or 10 1/2 meters long). I ran out of room, so the last one is standing on end.

May you fascinated with things that work.

Happy Weaving,
Karen

Tools Day: Scissors

Whatever you do, choose good tools. Scissors are probably the most frequently used small tools in my weaving room and sewing space, so it makes sense to use quality scissors. I started with Gingher many years ago, and have never been disappointed in their performance, so there are several in my collection.

Painted leather sheath for scissors, from the Philippines.
Painted red leather sheath, found on one of my trips to the Philippines, protects this pair of five-inch Gingher Sewing Scissors. These scissors live in a holder on the table where I wind all my quills.

I have a variety of scissors, and each has their own special place to call home. A few sit in custom felt sheaths. To make the sheaths, I wove a variegated wool band on my inkle loom, which I then machine washed and dried vigorously to cause the wool to felt. I then cut and stitched each little sheath to size.

Small scissors in inkle loom woven felt sheath.
Five-inch Gingher Sewing Scissors that live in the loom bench basket by my Glimakra Standard. I clip threads as I go, so these must be in easy reach. The felt sheath doubles as a pin cushion.

And, as your mother always told you, never ever use the fabric scissors to cut paper. There are paper scissors for that.

Gingher Dressmaker's Shears
Eight-inch Gingher Dressmaker’s Shears for cutting fabric, and only fabric. Cutting the warp off the loom counts as cutting fabric.

Small pretty scissors and inkle-woven felt sheath.
Pretty little scissors that live on my sewing/cutting table. These are used for clipping sewing threads and for some finishing work.

Famore Rainbow Colored Snips. Great for snipping threads as I sew!
Famore 4.5″ Rainbow Colored Snips also live on my sewing/cutting table. They come with me to the sewing machine for quick and easy snipping of threads.

Clover thread cutter, with handwoven band for hanging around neck.
Travel thread cutter lives in the bag with my travel tapestry loom. The handwoven band, worn around my neck, keeps the Clover cutter at my fingertips.

Gingher Thread Snips, with handwoven inkle band for neck strap.
Gingher Thread Snip is the most recent addition to my cutting collection. It lives on my Glimakra Ideal loom, hanging on the corner of the front beam. While weaving, I wear the inkle-woven band around my neck, so the snips are always at hand.

Collection of scissors and their sheaths.
It must be bedtime for the scissors, snippers, and cutters!

May your tools serve you well.

On the cutting edge,
Karen