Weaving Is Stretching Me

This warp is a triple challenge! 1. Full width (110 cm), 2. Fine threads (24/2 cotton), and 3. Unevenly-spaced narrow stripes. Three hours to wind the warp. Three hours to pre-sley and beam the warp. Seventeen hours to thread heddles, sley the reed, tie on the warp, and tie up the treadles. Why invest this much time and embrace this much difficulty?

1,984 ends have been threaded in heddles, and now are being sleyed through the 90/10 reed. Careful checking and re-checking all through the processes helps prevent errors.
It is a good feeling when all the ends are finally in their places.

Why embrace this challenge? Because I see what no one else sees. I see the curtains that are specially designed for our remodeled bathroom. I understand the draft, the threads, the stripes, and everything that works together in a certain way. I see it. Though not yet visible, I could see it before I started. And so, all the challenges become part of the story, and I’m determined to keep going. I aim to finish strong.

After all is set up, the first testing I do is with shuttles. Which shuttle is best for sending all the way across this wide warp? The medium Glimåkra boat shuttle that holds 11 cm quills is the winner, not the longest, largest, and heaviest shuttles.
Seeing the beauty of this cloth solidifies the hope of seeing special curtains gracing our bathroom windows.
What begins as an M’s and O’s draft for kitchen towels in Väv Magazine, and expands with pictures in a Malin Selander book, and grows with my imagination, is now visible on the loom!
The two biggest challenges that remain: 1. Filling quills. It takes a while to fill a quill with this fine thread. It doesn’t take long at all to empty the quill as I weave. 2. This wide warp stretches my arms to my full arm-length reach. It’s good to be stretched! 🙂

This is a picture of faith. Faith acts on things not seen by others. Faith sees what is not yet visible. With faith in Jesus Christ, all the challenges become part of the story. We go the duration because we have a view of the finished work.

May your challenges stretch your faith in a good way.

Giving Thanks,
Karen

Bright Yellow Rug Warp?

Finally, one bright yellow tube of rug warp is coming off the shelf! Bright yellow is subdued by pairing it with tan, making a creamy neutral warp for my next set of rag rugs. I bought the tube of yellow 12/6 cotton for half price on a clearance sale a few years ago. What was I thinking? I haven’t used yellow in a rug warp before, but it looks like this is going to work.

Winding a warp on the warping reel is my kind of fun. This warp chain is ready to take to the loom.
Warp is brought to the loom in three bouts. This series of rag rugs will be an exploration of Jamtlandsdräll.

Keep an ongoing conversation with the Lord. Sometimes it takes a while for us to understand the direction he has for us. It’s like looking at that yellow tube of thread, until finally you gain the courage to take it off the shelf. Right then, you notice the tan thread. The answer has been there all along.

May you enjoy a good long conversation.

With you,
Karen

Eleventh Broken Twill Placemat

It’s a temptation to hurry up when I am this close to the end of the warp. There is only one more placemat to weave, plus a little extra warp after that. I remind myself that there is no reason to rush. A steady pace helps me avoid careless errors that I’m prone to when I’m in a hurry. I’ll have all twelve placemats soon enough.

Broken twill in two blocks.
Green 22/2 Cottolin warp, and 8/1 tow linen weft in dark blue, green, teal, and black. Orange “cutting line” between placemats.
Glimåkra Julia, using eight shafts and eight treadles. Cloth beam is filling up nicely.
Eleventh placemat out of twelve. One more to go, plus a little bit of extra warp.

The Lord shows us how to live. He directs us in a way that sets a steady pace for life. No need to hurry. Enjoy each moment as a gift from his hand.

May your days be free from hurry.

Happy weaving,
Karen

Is it a Rug or Is it Art?

Spaced rep rag rugs are off the loom! Follow the pictures to see how they came out, and the surprising thing I am doing with one of them. (It was Steve’s idea.)

Short piece at end of warp gives opportunity for exploring design ideas. Specifically, I am changing weft colors separately from changes of treadling pattern.
Cloth beam satisfaction.
Reverse side is always seen first.
Fascinated with how new fabric folds like ribbons on the floor, and how the warping slats look like a game of Pick-up Sticks.
Still looking at the reverse side. Loom cleanup begins.
After cutting off, the piece undergoes finishing. First, I tie warp ends into knots, which takes me about 2 hours per rug. Then I hand hem the rug using 12/6 cotton rug warp. And finally, I give the rug a good steam pressing, which helps even things out, shrink things together a bit, and makes the rug lay flat.
One warp, four rugs. First small rug (not seen) went to my friend Nancy at a Christmas gift exchange. Last small rug (from the end of the warp) has an irregular repeating pattern. The two longer rugs have a place in our home. Did I say “rug?”
If you hang a rag rug on the wall it becomes art. If you hang it on the massive stone fireplace it makes a house a home.

Be different in a good way. Be set apart from things that entertain the world. Find your pleasure in things that please the Lord—like creativity, beauty, and love poured into your home.

May you express yourself in positive ways.

God bless your home,
Karen

Check for Accuracy Now or Backtrack Later

It pays to check your work. I have reached a new level of experience in distributing patterns shafts. I know how to do it backwards and forwards now. Literally. Unfortunately, I moved almost all of the pattern shafts before noticing that the spacing between units is not quite right. Uh oh! So, one by one, I reversed the distribution of pattern shafts to get back to the point of error—the very beginning. The reverse move was …more complicated.

Distribution of pattern shafts is part of the setup for the drawloom. It is a multi-step process that moves the pattern shafts, one at a time, from the heddle bar at the back of the loom to the pattern shaft holders just behind the ground shafts at the front of the loom. Sound complicated? It’s not that hard, and is fun to do after you’ve done it a few times.

Lesson learned: Check my work. I am off by only one unit of threads. That small miss, however, is enough to sabotage the whole project if not corrected. The sooner I check my work against the master plan the better. Fortunately, everything at the loom is fixable. It’s never too late to start again.

First, I use an old inkle band to slip between heddles that I am separating to transfer to a pattern shaft. Because I am using a combination of pattern shafts AND single units, I separate the heddles on the “front” side. If I were usining only pattern shafts and no single units, I could separate the heddles from the back while standing behind the loom.
I insert a pattern shaft through the separated pattern heddles. Then I remove the inkle band and hang it around my neck, ready for the next transfer.
I slip the waiting heddle bar through the pattern shafts that have not been separated…
…and remove the first heddle bar. This releases the separated pattern heddles onto the pattern shaft, which is hanging in a pair of holding cords. From here, the pattern shaft is moved forward to the pattern shaft holders. (I also adjust the clip overhead that connects the thread unit to a single unit draw cord.)
After backtracking and starting over, I now diligently check the number and spacing of units on the heddle bar after every pattern shaft is moved into position. Success!
Twelve pattern shafts, plus one X shaft. This project uses pattern shafts for the borders only – top, bottom, and sides. The rest of the pattern areas will use single-unit designs.

The sooner I check my life against God’s master plan the better. Fortunately, everything is forgivable. It’s never too late to start again.

All set and ready to go! Everything works. After a bit more testing of weft colors and patterns, it’s critter time. Watch for Mr. Armadillo first!

May you check for accuracy sooner than later.

Be blessed,
Karen